Common Electrical Problems at Home

Burned Plug Socket

Your safety is paramount when it comes to household electrics. Flickering lights, high bills and faulty gadgets on your home circuit can all be a symptom of electrical problems and you must call electrician in OKC at that time. Identify problems as well as the most appropriate solution from the list below.

Hazardous Problems

Electrical Surges

Including lightning strikes, damage to power lines, defective equipment or poor electrical wiring in the home, electrical spikes can be triggered by anything. While an actual surge lasts just one microsecond, repeated surges can destroy the electrical components that are linked to your house, dramatically degrading your life expectancy.

Sags and Power Dip

Unlike voltage spikes, electrical supply sags and dips can often be due to devices connected to your power grid that are unreliable or constructed from inferior materials and draw a lot of power when turned on.

Electrical Shocks

An electrical shock is a gross experience. Although they are generally very mild, quite close to a static shock, they warn us that electricity is harmful if it is not likely to be used.

Usually, electrical shocks happen when you turn on or off a computer. The problem might be with the unit, or it might be in the wiring. This can be checked by plugging into another system and seeing if the findings are reproducible, but you risk another electrical shock. It may be better to talk to an electrician in most situations.

An Overloaded Circuit

Overloading power boards is one of the major causes of repeated circuit breaker tripping. Most homes and condos, including newer ones, do not have sufficient power points for a full home entertainment unit system, for example. When circuit breakers are constantly tripping in your house, it may be down to overloading.

Burned Plug


Loose Plug

Turn off the breaker. Double test for outlet voltage (use or plug in a volt meter). Remove the cover plate and add outlet shims.

Broken Switch

Switch off the circuit breaker (when you choose the wrong one, the light will go out). To remove the faceplate, use a flathead screwdriver and replace the light switch with a Phillips head. Check for electricity the two wires attached to the screw. If it is free, the light switch will be disconnected and reassembled.

Simple Short Circuit

Many electrical appliances will frequently travel or short circuits, such as hairdryers. Reset the disconnector. Repeated incidents with the same unit mean that it is the computer – not the electrical system. Without the device? A pro should repair a short in the wiring or receptacle.

Damaged Cord

Unplug the ends of both. Turn the old plug off. Gently praise the insulation jacket and peel it off. Use a wire stripper and twist each wire tightly at the end. Screw them in the back of the plug: black to gold; the silver screw is white; the red screw is yellow. Then the plug is closed and the wires sealed. Cut in the center? Buy additional ends and make two new ones for the damaged thread.

Contact Prolectric for electrician in OKC.